TCB-IFCB-4E
ON/OFF CONTROL BOX
DI / SDI & VRF
TCB-IFCB-4E
|
The device is designed to
give remote on/off control, operation and remote fault
indication for DI/SDI/SMMS/SHRM systems. The device may be
connected to single indoor units or one device may be
connected to a group of indoor units.
|
|
|
Application
The device would typically be used where it was
necessary to remotely enable or disable a system and provide a
means of operation and fault monitoring. An example of this
would be a simple and cost effective means of integration to an
existing BMS system.
|
|
Connections
The device is enclosed in a galvanized steel
enclosure, which should be mounted adjacent to the indoor unit
and connected to the indoor PCB via the CN61 socket. The
power supply for the device is obtained from the indoor unit
supply terminals.
|
|
Limitations
The output contacts for operation/fault
indication are limited to 230 Volts and 0.5 Amps.
ON/OFF control cabling is limited
to 500m using 2-core 0.75mm2 cable.
Operation/fault output cabling is
limited to 200m when using 3-core 0.75mm2 cable or 400m when
using 1.5mm2 cable.
Enclosure Dimensions: 66 x 170 x 200
|
|
|
Downloads |
 |
TCB-IFCB-4E - Installation
Manual
|
