- Operational Status
- Run & Fault
- DI/SDI/VRF |
 |
RBC-SMIM3
INDICATOR MODULE
RBC-SMIM3
|
The device is designed to
give the operation and fault status for DI/SDI/SMMS/SHRM
systems. An indication of whether a system operating or has
a stopping fault is given via a pair of LED’s located on the
device and the activation of a relay output. The volt free
relay output terminals allow for remote interfacing with a
control panel or BMS system.
|
|
|
Application
The device would be used where the remote
indication of a systems status is required. This may be required
in critical areas such as server rooms and laboratories.
|
|
Connections
The device should be located adjacent to the
indoor unit and connected to the PCB via the CN61 socket.
|
|
Limitations
The relay output terminals are rated at 230 Volts
A/C with 6 Amp resistive or 1.5 Amp inductive loads.
|
|
|
Downloads |
 |
Wiring Diagram |
|
