The FDP2-F was principally designed to allow a
fault condition to be transmitted to external systems via a
relay contact. The FDP2 has several modes of operation these are
configured by using the dipswitches SW1-7 they are as follows.
Fault monitoring
Fault monitoring + locked Cooling preset
Fault monitoring + locked Heating preset
Fault monitoring + locked Auto preset
The FDP2-F has the ability to
control two units in a duty share configuration the units will
automatically change over on a 24hour basis and in the event of
any fault both units will be enabled an FDP2-F is required for
each indoor unit.
FDP2-F can be networked to give
advanced functionality the FDP2-F can be used as a group
controller to control large groups of multiples of eight indoor
units. The controller can linked to other Realtime controls
products to give stand-alone BMS applications for retail or
residential applications. Further details of advanced control
options are available on request.
