|
Application
The infrared remote can be used to control a
group of up to eight indoor units and is equipped with an
internal room temperature sensor, which may be configured to
take priority over the indoor unit return air sensor. Should the
device be taken outside its operational range, the indoor unit
will automatically revert to sampling from the indoor unit
return air sensor. The device can be used to interrogate the
indoor unit to receive system fault codes, however the
engineer’s menu and data retrieval function of the standard
wired remote controller are not available. Where indoor units
require additional configuration it will be necessary to
temporarily connect a standard wired remote controller, whilst
the modifications are made.
|
