- Wired remote control
- Group control up to 8 units
- Room temperature sensor
- Error fault code display
- Engineering sub-menu
- Temperature control
- Mode & fan control
- External fan on/off
- Louvre control |
 |
RBC-AMT31E
WIRED REMOTE
DI / SDI & VRF
RBC-AMT31E
|
The standard remote
controller gives access to all of the functions for the
indoor unit. It also gives access to the configurable
engineers menu and data retrieval features of the system,
such as fault code and sensor information. The device is
compatible with DI/ SDI/SMMS and SHRM indoor units. |
|
|
Application
The
standard remote controller can be used to control individual
units or groups of units up to a maximum of eight. Two remote
controllers may be connected on any group or single application,
with one remote being designated as a master.
The device is fitted with an internal room
temperature sensor, which may be configured manually through the
engineer’s menu. Once configured the indoor unit will sense the
room temperature from the remote rather than the indoor unit
return air sensor.
|
|
Connections
The remote
controller connects to the indoor unit via a 0.75mm2 two-core
cable.
|
|
Limitations
The remote
controller can control an individual or a group of eight indoor
units. This is reduced to a maximum of seven indoor units
where a second remote controller is to be used. |
|
|
Downloads |
 |
RBC-AMT31E - Operating
Manual
RBC-AMT31E
- Service Manual |
|
