RBC-EM1-PE
WINDOWS ENERGY
MONITORING
RBC-EM1-PE
|
The RBC-EM1-PE consists of a power meter and
current transformers. All these components are required to
be mounted in a suitable enclosure. The power meters then
connect directly to the windows package. The RBC-EM1-PE kit
consists of a Lon works power meter and a set of three
current transformers, one for each phase.
|
|
|
Application
The RBC-EM1-PE allows the total power consumption data to be
divided between the indoor units and be included on the tenant
bill. A power meter for each refrigerant circuit is recommended.
|
|
Connections
The power meter connects to the PC and LonWorks gateway via the
AB network the recommended cable is 2-Core Screened 1.5mm2.
The current transformers connect to the power
meter by a 1.5mm2 cable The power meter requires a reference
voltage from each phase the power meter should be protected by a
circuit breaker.
The supply to the outdoor unit should pass through the centre
of the current transformer.
|
|
LimitationsOne
power meter for each refrigerant circuit, i.e. one RBC-EM1-PE is
required per system.
Dimensions (L x H x D)
Power meter: 150mm x 80mm x 120mm
Current Transformer: 800mm x 80mm x 600mm
|
|
Solution
Components
RBC-WP1-PE
Windows package will be required to control the
air conditioning allow remote access and provide the energy
billing function.
TCB-IFLN640TLE2
The Lon works gateway will be required for every
64 indoor units.
TCB-PCNT30TLE2
Network adapters will be required for each split
indoor unit.
RBC-EM1-PE
If energy monitoring is required, an RBC-EM1-PE
kit is required for each refrigerant system.
|
|
|
Downloads |
 |
Wiring Diagram |
