Application

The application of this module is very versatile as it is an interface to other equipment. If an input is made to the module Interactive intelligence can act on the input and perform an operation i.e. enable units in specific modes, indicate status of external plant on the PC etc. The relay outputs can be used to enable external plant in conjunction with the AC or independently.

Enable air handling plant
Toshiba VN unit control
Lighting control
Fault Output
 

Connections

The module is connected to the LonWorks network that links the components to the Interactive Intelligence software. The device requires a 24Vac 0.5A supply this is normally derived from a panel-mounted transformer. The module mounts on a piece of standard Din rail the device should be housed in a suitable enclosure. The device has eight inputs these are volt free and could be connected to a contact closure this input can be used within interactive intelligence. The eight outputs are relay contact closures the contacts are rated at 24V 0.5A resistive load.
 

Limitations

Each device requires a power supply

Downloads